The timeless fantastic thing about traditional Parquet flooring never ages or go’s out of fashion. It’s unique magnificence and flexibility means it could actually come in many different types and colours.
When putting in original parquet flooring the primary thing you need to check is the moisture of the sub –Flooring Contractor base, this must be under 5%. The second thing is parquet flooring likes to be laid on a degree surfaces the, the more the ground level is out the more chance you will have of gaps when laying. Now on to gluing the parquet flooring down use either a bicthem primarily based glue like f21 or a more fashionable glue like sika which is a (ms polymer), Preferably the second but each are settle forable.
Typically fitters tend to make use of bitchem on old floors as this can react with the present old bitching that is already down and of course the price of a ms polymer which is three times the price. Each will do similar job for instance them old floors which have been down a long while they all used bitchem in them days and there forty fifty years old.When glueing down the block its good to try and make sure there is no such thing as a gaps, however gaps or not the end of the world as the whole ground might be full of a filler which consists of resin and sawdust from you ground once sanded.
As soon as flooring is laid sand ground in a 50-60 grit for new blocks and a decrease grit 0f 18- 36 grit for relaimed floors. Then combine the saw mud with resin and fill the entire ground twice. Then sand the whole ground repeatedly and again going up the grits every time. Then finishing on a a hundred and twenty grit all over. clean the room and ground making sure all mud is up.tack the ground with a tack cloth make sure all dust is up.
Then roll on a primer wait a number of hours to dry then roll on a laquer leave over night to dry and cure. Finally scrim the ground in a advantageous grit sand paper or screen, clean properly and tack again, then apply the final coat of laquer. You’ll be able to apply more coats the more coats you apply the longer the finish should last and the more depth and the finer the finish up to 7 coats.